UNIPALK

Single-component crystallising polyurethane varnish, transparente gloss or matt non-yellowing finish.

Special product for treating-protecting wood floors and all walk-on wood surfaces (steps, platforms, etc…).

This product is easy to apply, dilates and adheres well.

The film formed is very elastic, resistant to scratches and knocks.

Unipalk is a varnish that crystallises, thereby obtaining exceptional surface hardness and resistance to wear.

The protective film does not absorb dirt and is therefore easy to clean and maintain.

Unipalk makes surfaces soft to the touch and water-repellent and enhances the natural beauty of the wood and maintains this over time.

Unipalk is ideal in all cases where high mechanical resistance is called for and for all those surfaces that require excellent resistance to wear (work benches, support bases, special shelves, etc..).

INSTRUCTIONS FOR USE:

- Make sure the surfaces to be treated have been carefully sanded and washed and that they are dry.

- Shake the can well before using.

- Apply thin and regular coats at 24 hour intervals using a flat and wide brush or short-haired roller.

- For new wood: 2-3 coats.

- For wood floors to be renovated: 1- 2 coats (to favour adhesion, sandpaper and remove all the old film of varnish which is not perfectly anchored to the surface).

- For best results, we recommend sanding lightly and cleaning the surface before applying the last coat of varnish, and applying the product in premises where the temperature is over 15C). .