|
Gloss or matt clear finishing varnish, ideal for treating all kinds of wood articles requiring quality surface protection both inside and outside the house.
Water-based product suitable for finishing and/or renovating all types of wood already treated with impregnating agent or with either water or solvent-based sealer primer.
This is a highly elastic product that is resistant to knocks and scratches.
Pinteco varnish is ideal for finishing frames, balconies, matchboards and wood products in general, both inside and outside the house.
It is a clear varnish that adheres perfectly and protects wood against atmospheric agents.
Pinteco does not flake but wears away over the years.
It does not turn yellow and makes surfaces full and soft-to-touch.
It is an odourless water-based varnish and can therefore also be used indoors without any special precautions.
Pinteco enhances and maintains the natural beauty of wood over time.
Instructions for use:
- Make sure the surfaces to be treated are sandpapered, dry and clean (in the case of wood to be restored: sandpaper and remove the old film of varnish which is not perfectly anchored to the surface).
- Stir well before use.
- Apply a thin coat of product on the surface using a brush or spray-gun after treating with impregnating agent (Legnosan) or water-based sealer (Acrivel).
- If necessary, apply a second coat after 3-4 hours.
- The implements used can be cleaned with water straight after use.
- The varnished surface will be perfectly dry to the touch 24 hours after the last application.
|
Drill Bits.
