| PALCHERINA gloss and matt polyurethane varnish to be catalysed.
2-component polyurethane varnish to be 100% catalysed for gloss or matt finish, transparent and non-yellowing.
Specific product, ideal for treating and protecting wood floors and wood walk-on surfaces in general.
This product is easy to apply, dilates well and is full covering.
It leaves an elastic protective film that is resistant to knocks and scratches.
This varnish crystallises, thereby obtaining exceptional surface hardness and resistance to wear.
Surfaces treated with Palcherina are soft to the touch and water-repellent.
They do not absorb dirt and are therefore easy to clean.
Palcherina enhances the natural beauty of wood and maintains this over time.
Product suitable for all those cases in which high mechanical resistance is required (kitchen tops, work benches, platforms, etc…).
INSTRUCTIONS FOR USE:
- Make sure the surfaces to be treated have been carefully sanded and washed and that they are dry.
- Shake the cans well before using and mix at 100% (1:1) the varnish part A with the relative catalyst part B.
- Using a flat and wide brush or a short-haired roller, apply thin and regular coats at 24-hour intervals.
- For new wood: apply 2-3 coats (the best thing is to start treatment with a coat of specific Turapalk primer sealer for wood floors).
- For wood floors to be renovated: 1- 2 coats (to favour adhesion, sandpaper and remove all the old film of varnish).
- For best results, we recommend applying the product in premises where the temperature is over 15C and humidity is fairly low.
- It is best to sandpaper lightly before each application.
|