 Before every participation it is well to remove the door from its center, to take apart the blacksmith shop of which is equipped and to position her in horizontal on a support.
1- Corresponded superficial flat of the door using one wedge.
2 - If the door will come painted applied with one small spato it of the plaster from wood in the splits and the fissures making to penetrate accurately it.
3 - You render smooths down and to uniform the surface of the door with one orbital lapping machine equipped of automatic aspiration of the powder in order not to diffuse it anywhere in the house.
4 - Diluted the painting opportunely to apply. Used paintings to the water, that they concur to obtain an optimal result.
5 - The door goes mail in horizontal in order to avoid filterings. For this purpose it is well to use two supports. Painted before you make and turns the door from the other part in order to only paint the second one after that the painting completely is dried.
6 - Eventual bordature or riquadrature rifiniscono with a small paint-brush that it allows to work with precision.
7 - In order not to make to goverflow the painting you place to contact with the wood a cardboard in a position to withholding eventual filterings.
8 - With a paint-brush painted around to the "hollow ones" from which you have previously taken apart the handles.
9 - In order to renew or to change to the aspect of the house doors an good idea it is that one to replace the handles. Think of us before to reassemble those old ones.
|
Drill Bits.
